This article will show you how to fix up weird scanning and repairing of drives at boot screen of Windows 8 using “REGEDIT”.
On Windows 8, today we’ve experienced a weird problem that is for repairing and scanning of drives. Some times it happens that at start up on the booting phenomenon, Windows ran into a program probably to scan and fixes the drives which are not faulty at all.
This scanning and repairing takes a lot of your precious time and do nothing and takes you to the as usual start up. Because it first scans C, then D, and then E drives and so on which consumes unnecessary time. Also it depends upon dual boots or multiple boots as Windows also fix the other drives which have different OSs installed on them.
Now if you try to repair the drive usually general method (Drive -> Right Click -> Tools -> Error Checking -> Check), it will tell you nothing:
So how to fix up this weird issue? Today, in this article, we’ll tell you how to resolve this issue using Registry Editor.
1. Press the + R simultaneously and put regedit in Run dialog box.
2. Navigate to the following registry key:
3. In the right pane of this location, double click on multi string BootExecute. It must have the default value as autocheck autochk *. Replace the default value with autocheck autochk /k:C *.
That’s it. Close Registry Editor and now make reboot at least two times to make this settings working and you’d no longer see scanning and repairing drives at boot screen until you do this operation manually in the OS using drive error checking tools.
Hope you find the tip useful…:)