Skip to content

Published: December 26, 2010 | Applies to:

This article enlists sound problem troubleshooting approaches for Windows XP machines. Get fix to your issue!

In Windows XP under some cases you will see a concrete error that can help you fix the sound problem in Windows XP. The media player you are using can give an error, or you can check the Device Manager and see an error on the audio device.

Typical examples of sound errors in Windows XP are:

  • WAV sound playback error detected
  • Your audio hardware cannot play files like the current file
  • No wave device that can play files in the current format is installed
  • Windows Media Player cannot play the file
  • This device cannot start. (Code 10)
  • The drivers for this device are not installed. (Code 28)

It is also possible that there is no error, but:

  • there is simply no sound
  • the sound is not working for internet pages
  • the sound only works on a headset and not on the speakers
  • sound is of bad quality
  • surround sound is not working.

In all cases it could be an audio configuration problem, but often it is a driver problem. The best approach is to go through the steps below and check each aspect.

Approaches To Fix Sound Problems

1. If you have an onboard audio card, you need to make sure the onboard audio device is enabled in the Bios. Instruction will vary per motherboard, so you need to follow the instructions in your PC or motherboard manual for this. If you are using a separate sound card, the onboard should be disabled of course.

2. Open the Device Manager (open the Control Panel -> double-click the System icon -> in System Properties dialog box, select Hardware tab -> click Device Manager button).

3. In the Device Manager, open the “Sound, video and game controllers” group. Here you should see your audio device as shown in the image.

4. If the sound device is not listed, check if any devices are listed in the “Other devices” or “Unknown devices” group, most likely with a yellow exclamation mark.

5. If the device is not listed or if devices are listed under the “Unknown devices” group, the most likely cause is a missing or incorrect device driver. If you have the sound driver for the sound device, (re)install the sound drivers. If you do not have the drivers the easiest method is to use a driver update tool.

6. If updating the drivers does not work, you need to find the cause of the problematic device. If the sound device is listed in the Device Manager, and you still do not have sound, first open the Control Panel. In the Control Panel, double-click “Sounds  and Audio Devices”.

a. In the first screen, with the Volume tab active, make sure the Mute checkbox is not selected and that the volume slider is close to High.

b. Next, click the Advanced button, and in the Advanced Audio Properties dialog box, make sure you have a valid Speaker setup. At least make sure it is not set to “No speakers”. Click OK when done.

c. Now click the Speaker Volume button. Both the Left and Right speaker volume should be close to High. Click OK when done.

d. Next, select the Audio tab in the Sounds and Audio Devices Properties dialog box.

e. In the Sound playback group, you want to set the Default device to your sound card device. Part of the name will normally match with the name you found in the device manager.

f. Also click the Volume button in the Sound playback group and adjust the Volumes to a high enough level. The Volume Control will show the mixer, which does depend on the audio device installed. The sample has a SoundMax audio card. Clear all the Mute checkboxes.

7. You can repeat these steps for the MIDI music playback.

8. Although not a frequent problem, check if the Audio Service is running:

a. Select Administrative Tools in the Control Panel.

b. Then double-click Component Services, which will open a separate window.

c. In the left-hand pane, click Services (Local).

d. In the right-hand pane, scroll down to the Windows Audio service and make sure it is not disabled. If necessary, right-click Windows Audio, in the popup menu select Properties and then set the Startup type to Automatic.

9. If you have sound problems in games, you can check the sound card resources. Especially older games have limited detection of sound cards in respect to resources (IRQ, I/O address range).

Testing Sound With An Application

With these steps, you have checked and adjusted the sound setup in Windows XP. If sound problems still persist, chances are there are problems with the sound settings in the application you are using. If the sound problems are present for all applications, there probably is something wrong with the hardware.

The best application to test your sound setup with is the Windows Media Player, as it will use the standard Windows sound setup, which you just verified and adjusted. One setting in the Windows Media Player that needs to be verified is the DirectSound device.

1. Open the Windows Media Player.

2. In the Media Player, select Options in the Tools menu (press the Alt key to show the menu if not visible).

3. Now select the Speakers device and click the Properties button.

4. In the Speaker Properties dialog box, select the audio device to use for Sound playback. By default it will have Default DirectSound Device selected, but you can change it to the DirectSound device that is listed for your audio device.

5. Also clear the Use 24-bit audio for audio CDs for now to make sure that this Performance setting is not causing any problems. Click OK to close the Speaker Properties and then click OK again to close the Options dialog box.

Audio Or Video Codec Problems

When a computer plays an audio or video file, it will decode the audio or video data to be played with the sound device. Each different audio and video format requires its own decoder, or codec. One of the possible problems with no sound is that the right audio codec or video codec is not installed.

If your standard audio files do play, but a certain MP3, AVI or WMV file does not produce audio, the first thing to try is to install missing codecs. You can try and find out which codec is required and then find and install that code, but luckily there are a number of codec packages that can be downloaded and installed.

One of the most used codec packages is the K-Lite Codec Pack. With that installed most audio and video should play without problems … and with sound. There are more of course, a quick internet search can help you find others.

Hope you like the article!


SHARE: Facebook Google+ Twitter

Leave a Reply

Your email address will not be published. Required fields are marked *

What's New


Recent Comments

  • Spider : It is really Owesome, work like charm.... thanks for the hel...

    5 hours ago

  • Jonathan : Has there been any development on this? I have tried multip...

    1 day ago

  • Kapil Arya : ^^ Thanks for your input 😊...

    1 day ago

  • inalzninz : mine is not (javascript) its (loaditem) please solve this er...

    1 day ago

  • Joshua : I know this is an old thread, but thought I'd leave a commen...

    2 days ago


Windows Group Policy Troubleshooting